Metso expand Lokotrack range
Metso have introduced the Lokotrack LT110C. Designed for primary crushing, its rugged design, but compact size, is said to make it easier to transport from one location to another.
The LT110C is built around the world Nordberg C110 jaw crusher, which has a feed opening of 1100mm x 850mm.
Two types of feeder arrangement are available. Where large amounts of fines need to be scalped efficiently, the combination of a pan feeder and a separate two-deck scalper can be used. Based on the feeding system selected, the LT110C can be equipped with either a standard 6m3 or an optional 9m3 feed hopper.
There is also a choice of discharge conveyors. In addition to the standard 11m conveyor, there is an optional 14m folding conveyor, providing a discharge height of 3.7m.
The IC500 intelligent control system is fitted as standard. Once the Lokotrack is started up, the automation system monitors and optimizes the whole crushing process to ensure maximum throughput. If a problem arises, the IC500 provides the operator with clear information about the cause.
The LT110C primary jaw crusher can be combined with all secondary and fine crushing plants and mobile screens in the Lokotrack range.
Powered by a low-emission 310kW Cat C13 diesel engine and weighing 58,000kg, the LT110C is 15.6m long, 3.0m wide and 3.85m high when being transported.
Optional accessories include: wireless remote control, a dust-control system, a hydraulic hammer to clear feed blockages, and a hydraulically-powered generator.
The LT110C is built around the world Nordberg C110 jaw crusher, which has a feed opening of 1100mm x 850mm.
Two types of feeder arrangement are available. Where large amounts of fines need to be scalped efficiently, the combination of a pan feeder and a separate two-deck scalper can be used. Based on the feeding system selected, the LT110C can be equipped with either a standard 6m3 or an optional 9m3 feed hopper.
There is also a choice of discharge conveyors. In addition to the standard 11m conveyor, there is an optional 14m folding conveyor, providing a discharge height of 3.7m.
The IC500 intelligent control system is fitted as standard. Once the Lokotrack is started up, the automation system monitors and optimizes the whole crushing process to ensure maximum throughput. If a problem arises, the IC500 provides the operator with clear information about the cause.
The LT110C primary jaw crusher can be combined with all secondary and fine crushing plants and mobile screens in the Lokotrack range.
Powered by a low-emission 310kW Cat C13 diesel engine and weighing 58,000kg, the LT110C is 15.6m long, 3.0m wide and 3.85m high when being transported.
Optional accessories include: wireless remote control, a dust-control system, a hydraulic hammer to clear feed blockages, and a hydraulically-powered generator.
