Road construction firms prosecuted after worker loses arm
Amey LG, Lafarge Aggregates and Ashmac Construction to pay more than £400,000 in fines and costs
THREE construction firms have been ordered to pay more than £400,000 in fines and costs for serious safety failings, after a worker lost his arm when it became trapped in poorly-guarded machinery during a road-surfacing operation in Hertfordshire on 8 March 2012.
The highly experienced road worker was preparing a chip spreader for resurfacing works on the A1001 in Hatfield when his left arm became caught in the machine’s rotating auger, causing serious injuries. The man had to have his arm amputated shortly after the incident and has been unable to return to work since.
The incident was investigated by the Health and Safety Executive (HSE), which prosecuted Amey LG Ltd, Lafarge Aggregates Ltd (acting as Amey Lafarge, a joint venture in charge of the operation) and Ashmac Construction Ltd, who provided workers to the joint venture, for multiple safety breaches.
Watford Magistrates’ Court heard that, in order to prepare the chip spreader for use, the worker placed on the site by Ashmac Construction started the machine and the rotation of its internal auger. He also repositioned the machine’s distribution hopper from kerbside to roadside to allow chips to be loaded – an operation which involved moving the mesh safety guard from one side of the machine to the other.
As he was reaching to move the guard across he tripped and fell forward towards the still-rotating auger, entangling his arm in the dangerous moving parts as he fell.
The HSE’s investigation revealed a series of safety failings on the part of all three companies.
The worker, who was not formally trained in the use of the spreader, and his colleagues were only given one evening to familiarize themselves with the machine by Amey Lafarge when they started work on site six months before the incident.
Amey Lafarge did not give the workers any instruction or training in how to operate the machine safely, including how to secure guards, nor were they given a copy of the operator’s manual for the machine. In addition, there was no safe system of work in place to ensure that the machine was set up and operated properly and that its use was restricted to those who were trained.
The joint venture did have a risk assessment and a site-specific method statement, but these did not reflect the reality of the controls in place for the use of the chip spreader. The risk assessment actually described a different type of chip spreader to the one used on site.
Moreover, Ashmac Construction Ltd did not take reasonably practicable steps to ensure workers that they placed on site and allocated to operate the chipper had received appropriate information, instruction and training in the safe use of the plant.
Amey LG Ltd was fined £150,015 and ordered to pay costs of £18,000 after pleading guilty to one breach of Section 3(1) of the Health and Safety at Work etc. Act 1974.
Lafarge Aggregates Ltd were fined £175,015 and ordered to pay costs of £18,000 after pleading guilty to one breach of Section 3(1) of the Health and Safety at Work etc. Act 1974.
Ashmac Construction Ltd were fined £30,015 and ordered to pay costs of £18,000 after pleading guilty to a breach of section 3(1) the Health and Safety at Work etc. Act 1974.
Following the case, HSE inspector Gavin Bull said: ‘This tragic incident, which has left a worker with life-changing injuries, was wholly avoidable. The risks associated with plant operating are well known in the industry.
‘This incident highlights the need for workers to receive the information, instruction and training they need to operate plant safely, and for companies to put in place measures to ensure the plant is operated safely on site.’
